| Price: |
$16.00
|
 |
|
|
Sold per Linear board foot
Details:
Blue and Pink Confor Foam $16.00 per LBF (linear board foot)- 1" thick.
If ordering 2 LBF (linear board foot), your piece dimensions will be 24" x 12" x 1"
All other colors are available by the sheet 30 x 80 in multiply thickness. Call 1-800-481-6033 for ordering details on these sheets. Extra shipping will apply due to over-sized length and weight.
Jacobs Upholstery uses a CONFOR® foam for many specialty upholstery needs including: airplane seat, motorcycle seats, automobiles and many other uses.
Regular adhesive such as our YELLOW LABEL GENERAL PURPOSE ADHESIVE - 12 oz at 6.95 per can - is a great glue for most projects.
Our CONFOR® foams offer a unique combination of protective padding applications. These urethane foams soften and conform when exposed to warmth, giving gentle, virtually pressure-free support. When the foams take a direct blow, however, their high energy-absorption characteristics enable them to absorb up to 97 percent of an impact. While they are slow to recover after deflection, they effectively resist compression set. Three standard densities and several stiffnesses are available.
|
Confor Properties
|
CF-47
Green |
CF-45
Blue |
CF-42
Pink |
CF-40
Yellow |
CFNT
Yellow |
Density Nominal (pcf)
ASTM D3574 |
5.8 |
5.8 |
5.8 |
5.8 |
5.0 |
Flammability
UL 94 |
Listed HBF |
Listed HBF |
Listed HBF |
Listed HBF |
Listed HBF |
| FMVSS-302 |
Meets |
Meets |
Meets |
Meets |
Meets |
FAR 25.853(a) Appendix F
Part I (a) (1) (ii) (12 sec) |
Meets |
Meets |
Meets |
Meets |
Meets |
| California Flame 117 |
Meets |
Meets |
Meets |
Meets |
Meets |
Ball Rebound (%)
ASTM D3574 |
£1.0 |
£1.0 |
£1.0 |
<1.0 |
<1.0 |
Thermal Conductivity ?
K Value
ASTM C177 (BTU in/hr ft2F) |
0.28 |
0.28 |
0.28 |
0.28 |
0.28 |
Compression Set(%)
ASTM D3574
22 hr at 158F
Compressed 25% |
0.3 |
0.4 |
0.9 |
0.6 |
1.8 |
| Compressed 50% |
0.6 |
0.6 |
1.0 |
2.4 |
6.0 |
Indentation Force Deflection
ASTM D3574 Test B1 (modified)
25% Deflection:
72F at 50% Relative Humidity |
43 |
34 |
26 |
15 |
8 |
Tensile Strength (psi)
ASTM D3574
20 in/min at 72F |
25.2 |
22.3 |
18.1 |
14.6 |
6.0 |
Tear Strength (lbf/in)
ASTM D3574
20 in/min at 72F |
5.5 |
4.6 |
3.4 |
1.6 |
1.5 |
Elongation (%)
ASTM D3574
20 in/min at 72F |
98 |
108 |
109 |
135 |
149 |
The data listed in this materials summary are typical or average values based on tests conducted by independent laboratories or by the manufacturer. They are indicative only of the results obtained in such tests and should not be considered as guaranteed maximums or minimums. Materials must be tested under actual service to determine their suitability for a particular purpose.
CONFOR is a trademark licensed to Aearo Company
Call Jacobs Upholstery at 1-800-481-6033 for any questions.
